![]() This is a plus for anyone wanting to create a streamlined look for less! More Storage – Because the doors and drawers sit on the outside of the cabinet frame, they leave more room on the inside to store items. Are full overlay cabinets worth it?įull overlay cabinetry takes less skill to build, so it is also less expensive. Double doors in full overlay style come without the vertical stile on the face frame which allows for even better storage capacity and easier access of stored items. Since they are not set inside the cabinet frame, full overlay provides the greatest amount of storage with ample room for items such as pots and pans. Full overlay leaves no space between each door/drawer and thus requires hardware. This is typically the least expensive cabinet option and is a top choice for people who want to leave off hardware. Partial overlay cabinets cover most of the cabinet frame but leave space between the drawers and doors. What is the difference between full overlay and partial overlay cabinets? Whereas the face frame is entirely visible on an inset cabinet, it is completely hidden on a full overlay cabinet. These are designed to fully cover the face frame. If a special drawer box size or style is ordered that exceeds the available sizes or tolerances of our maple stock, birch material may be substituted.Full Overlay Cabinets Defined Full overlay cabinets have doors and drawers with extra-large fronts. Standard drawer slides are BLUM full-extension soft-close undermounts. Standard drawer boxes are made from 5/8″ thick solid maple stock, with 1/4″ bottoms dadoed into the sides. We advise using a wooden toe base molding or some type of covering material for a more finished appearance on the installation. Recessed toe kicks on base and tall cabinets are considered unfinished parts. Shelves are adjustable using a peg-in-hole linebore system. Shelves are made from 3/4″ PBC core with natural birch veneer can be upgraded to plywood for an additional chargeīottoms, backs, tops, end panels, and face frames are assembled with the tongue-and-groove technique.Curved backs made from 1/8″ plywood are used on most corner cabinets or those containing rotating Lazy Susans. ![]() Backs of wall cabinets are 1/2″ thick plywood.Backs of base and tall cabinets are 1/4″ thick plywood supported by 3/4″ nailers.Sides, tops, and bottoms of all cabinets are 3/4″ thick plywood.Interiors are natural birch by default, but can be upgraded at your discretion for an additional charge. ![]() Framed cabinet boxesĪll styles of framed cabinetry boxes are constructed using 3/4″ solid wood face frames and mortise-and-tenon construction. See illustration at right for example of beaded inset. This makes outer pieces 1 1/2″ and the center, cross pieces yield out to 1 3/4″ wide. After construction, the 1/4″ bead is applied to the openings. ![]() Flush inset is simply flat edged cabinet frames like on our other styles.īeaded inset uses a 1/4″ bead applied to the inner edge of cabinet openings that have doors or drawers and uses 1 1/4″ framing throughout. We offer inset in two varieties: beaded inset or flush inset. None of the door’s edge thickness is visible. In these styles, the doors and drawers are flush inside the face frame. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |